Standards & Reference Materials

This area covers relevant standards and key reference materials relating to the use of zinc - or metallic-coated steel sheet. These materials are often protected by copyright laws and many of these links will point to the relevant document on the copyright holder's website, where the document can be purchased or downloaded.

ASTM INternational Standards Covering Galvanized Steel

	A90/A90M- Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
	A123/A123M- Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
	A153/A153M- Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
	A239- Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
	A385- Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
	A428/A428M- Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
	A459- Standard Specification for Zinc-Coated Flat Steel Armoring Tape
	A653/A653M- Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
	A742/A742M- Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
	A754/A754M- Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
	A755/A755M- Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
	A760/A760M- Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
	A761/A761M- Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
	A780- Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
	A792/A792M- Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
	A796/A796M- Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
	A798/A798M- Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
	A807/A807M- Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
	A875/A875M- Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process
	A879/A879M- Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
	A885/A885M- Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe
	A896- Standard Practice for Conducting Case Studies on Galvanized Structures
	A902- Standard Termninology Relating to Metallic Coated Steel Products
	A917- Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
	A924/A924M- Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
	A926- Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
	A929/A929M- Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
	A964/A964M- Standard Specification for Corrugated Steel Box Culverts
	A1003/A1003M - Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
	A1004/A1004M - Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
	A1030/A1030M - Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
	A1046/A1046M - Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process